hardware debug

英 [ˈhɑːdweə(r) ˌdiːˈbʌɡ] 美 [ˈhɑːrdwer ˌdiːˈbʌɡ]

网络  硬件侦错; 件测试; 硬件调试

计算机



双语例句

  1. GUSS the Universal System Simulator simulates hardware to test, debug, and profile software.
    通过系统模拟器,用于模拟进行测试、试和生成软件摘要的硬件。
  2. By using hardware circuit, the combined driving logic was fulfilled, thus reduce the work of software, make the hardware easily debug and adjust to generate needed waveforms.
    其中用到硬件电路实现组合驱动逻辑,从而简化了软件工作量,容易调试并且容易配置成实际控制对象所要求的驱动波形。
  3. The Design and Implementation of Tuning Software for the BES ⅲ Main Drift Chamber GUSS the Universal System Simulator simulates hardware to test, debug, and profile software.
    BESⅢ主漂移室模拟真实化调试软件通过系统模拟器,用于模拟进行测试、试和生成软件摘要的硬件。
  4. The hardware circuits and the debug methods based on LM386 and TDA2822M are given, and the anti-jamming methods are also given.
    介绍了车载手机免提通过有线方式的实现,分别给出了采用LM386和TDA2822M有线收发系统的硬件电路和调试方法,提出了抗干扰措施。
  5. The simulator designed can provide a realistic high-dynamic signal environment for parameters measurement, software and hardware debug, performance test and evaluation of GPS UE.
    所设计的GPS信号模拟器可以为GPS用户端设备的参数测量、软硬件调试、性能测试和评估等提供一个逼真的高动态信号环境。
  6. Secondly introduces the measure theory of Transformer Calibrator, designs The Transformer Calibrator system of hardware control: digital disposal module design, module board design, the EMC design and summarizes the system of hardware debug.
    接着介绍了互感器校验仪的测量原理,对互感器校验仪控制系统硬件进行了详细的设计:数字处理模块的设计、模拟板电路硬件设计和电磁兼容性设计。
  7. This paper describes the verification and debug system for the design of MIPS north bridge. The system is constructed by two parts, software simulation platform and hardware debug platform.
    介绍了在设计MIPS计算机的北桥过程中开发的一套的验证和调试系统,内容包括北桥的软件功能仿真平台和硬件验证、调试平台。
  8. Hardware Debug of Large Multiprocessor System Based on Boundary Scan
    基于边界扫描的大型多处理器系统的硬件调试
  9. Design and Implementation of a CPU Chip Hardware Test and Debug Platform
    一种CPU芯片硬件验证调试平台的设计与实现
  10. Completing the circuit design based on the serial fiber transmission and the parallel fiber transmission and theirs hardware debug.
    3:设计了通过光纤传输的串行传输方式和并行传输方式的电路并完成了硬件调试。
  11. Based on this interface, both the structure and function test and the hardware debug such as single step, breakpoint and watch can be applied to MD32.
    基于这一接口,可以对媒体处理器进行边界扫描测试,也可以进行硬件单步、断点、观察处理器状态等等复杂的硬件调试。
  12. It has passed the hardware and software debug and circuit test.
    本方案已经通过硬件、软件调试以及电路测试。
  13. The debugger realize co-debug ( software and hardware debug) as Instruction-Set Simulator is embedded.
    该调试器中嵌入了ISS仿真器,同时具有软件调试和硬件调试的功能。
  14. The author has done some work on the software and the hardware debug, and the control system is applied on a 1/ 4 horse power AC motor.
    作者进行了装置的软硬件调试,并在1/4马力电动机上进行了实验。
  15. Research and Design on a Hardware Debug Method for the Embedded System
    嵌入式系统硬件调试方法的研究与设计
  16. Designed the hardware circuit based on ARM+ FPGA, the paper opened up system schematic and PCB design, and hardware circuit debug process. 3.
    围绕ARM+FPGA框架,设计了整个系统的硬件电路,给出系统原理图和PCB设计及调试过程。
  17. Due to operation of hardware debug mode exceeds the operating system protection, the operating system will not recognize that the data has been changed.
    由于硬件调试模式下的操作突破了操作系统的保护,操作系统并未意识到系统内部数据已经被改变。
  18. Through the software and hardware debug, the experiment results show that the electric power monitoring instrument function are stable, all indexes can meet the basic technical requirements.
    经过系统的软硬件调试,实验结果表明,设计的综合电力监控仪性能稳定,各项指标基本达到技术要求。
  19. Finally, the thesis describes the related tests of whole system, which include hardware debug and communication interfaces test.
    论文最后阐述了在实验室环境下对整个系统进行的相关测试,包括硬件调试以及各个功能接口的单独通信测试。
  20. Finally built simulation experimental platform to carry on the hardware debug and CAN node receive-send experiment, finally discusses the laboratory procedure and method in detail to the system protection reliability and correspondence time and result is testified by the experiment.
    最后搭建了模拟实验平台对系统进行了硬件调试、CAN节点自收发实验,重点介绍了系统保护的可靠性和通信时间实验的实验步骤和方法,而且对结果进行了实验验证。
  21. Product test engineering department will finish all the design of hardware and software, then base on software and hardware to debug test parameter, until this device put into mass production smoothly.
    产品测试工程部将完成从测试板硬件的设计到测试软件的开发,再到软硬件结合调试直至顺利量产测试的整个工程设计。
  22. According to the performance indexes of traffic flow detection devices, I will design the hardware debug circuit board and write software. 4.
    根据车流量测试仪的性能指标,设计调试硬件电路板和编写软件部分。
  23. In the paper, FPGA is used as a core processor part. The paper has realized the hardware design and debug of the real time B code decoding system which is based on FPGA technology. Firstly, the paper introduced the concept of the B code.
    论文采用了FPGA作为核心处理器件,实现了基于FPGA的B码实时解算系统的硬件设计与调试。
  24. Through hardware debug and laboratory experiments, so that the design system to meet the required conditions, the normal measurement and display.
    通过硬件电路的调试和实验室实验,使该设计系统能够在要求的条件下达到正常的测量及显示功能。
  25. Secondly, through the bus-based scan chain shifting CPU instructions into the target system, and implementation of these instructions by single step in hardware debug mode, to modify the bus data, register data and memory data.
    其次,通过对基于总线的扫描链的移位操作插入目标系统CPU本身的指令,并在硬件调试模式下单步执行这些指令,对系统内部的总线数据、寄存器数据、存储器数据进行修改。
  26. Secondly, we start to carry out the hardware design and debug of the audio system.
    然后,开展音频系统的硬件设计与调试工作。
  27. The entire system include hardware design and debug, software design and debugging, low-power design platform analysis and integrated debugging of hardware and software.
    整个系统包括硬件电路设计和调试、软件设计和调试、低功耗设计、平台分析和系统的软硬件联调。
  28. Through the hardware and software debug, the paper finally analyses the existing problems, gives some improving methods, summarizes the design experiences and makes a prospect for this system.
    通过对硬件和软件的调试,分析了设计存在的问题,提出了一些改进方法,并总结了一些设计经验以及对本系统未来发展方向的展望。
  29. Hardware design includes schematic design, PCB design, hardware debug, firmware design and state machine design. Software design includes driver design and application design.
    硬件设计包括原理图设计,PCB设计,硬件焊接及调试,外部逻辑状态机设计以及68013固件程序设计;软件设计包括驱动程序设计和应用程序设计。